Do DIDWW Systems Accept Non-Standard SIP Ports Such as 5070?

Yes, DIDWW system accepts non-standard SIP ports.

In order to set the mapping with non-standard SIP ports please use the Custom mapping as follows:

1.    Enter your account at http://www.didww.com/ and go to Mappings page (Figure 1).

Figure 1: Access Mappings Page in your Account

2.    After entering the Mappings page please choose Custom mapping (Figure 2).

Figure 2: Choose Custom Mapping

3.    In the Custom mapping page, fill the following information:

·        Friendly name – Specify name by your choice that you will be able to recognize this mapping easily, choosing the name is important when you have many mappings (Figure 3).

Figure 3: Creating Custom Mapping (1)

·        IP address or domain - Select your IP address or domain if the phone / softphone, including the port number, for example: 192.168.100.100:5070 or sip.voip.com:5070 (Figure 3).

·        Protocol – Select the SIP protocol (Figure 3).

·        Preferred server – Select the preferred server, choose the server that is the closest to your location (Figure 3).

·        Default mapping - If checked, all new DID numbers will be assigned to this default mapping (Figure 4).

Figure 4: Creating Custom Mapping (2)

4.    Click on the

5.    Press the Add button to finalize the customer settings (Figure 5).

Figure 5: Finish Creating Custom Mapping

6.    After pressing Add you will see the new created custom mapping (Figure 6), if you wish to change this custom mapping settings press the Edit button, if you wish to remove this custom mapping press the Delete button.

Figure 6: The New Custom Mapping

7.    If you wish to add another custom mapping press on Add Custom Server (Figure 6).